Penentuan Kapabilitas Transfer Daya Listrik dengan Mempertimbangkan Stabilitas Tegangan Statis Menggunakan L Index

Al Imran Al Imran(1*),

(1) Universitas Negeri Makassar
(*) Corresponding Author




DOI: https://doi.org/10.26858/ijfs.v5i2.11116

Abstract


The ATC determination method in this study uses line  thermal constraints by calculating reactive power flow, and using Linear Power Transfer Distribution Factor. The ATC determination considers the magnitude of the voltage magnitude and the static voltage stability of each bus after the power transfer simulation is performed. Static voltage stability is calculated using the L Index. The results showed that the transfer of power equal to the ATC value in an electric power system caused a decrease in voltage stability or an increase in the L index value on the receiving bus on average 19 times the initial loading condition, even though it was still at a stable level. While the receiver bus voltage magnitude has decreased

Full Text:

PDF

References


Al Imran. (2006). Penggunaan Faktor Distribusi Perpindahan daya Nonlinear dan Pertimbangan Aliran Daya Reaktif dalam Perhitungan ATC. Jurnal ITENAS Bandung, No. 4, Vol. 10, Des. 2006 – Peb. 2007.

A. J. Wood and B. F. Wollenberg. (1996). Power Generation, Operation, and Control. John Wiley & Sons, Inc., New York.

B. Stott and J.L. Marinho. (1979). “Linear Programming for power system network security applications”, IEEE Transactions on Power Apparatus and Systems, Vol.PAS-98, No.3, pp. 837-848

G.C. Ejebe, J. Tong, J.G. Waight, J.G. Frame, X. Wang, and W.F.

Tinney. (1998). “Available Transfer Capability Calculations”, IEEE Transactions on Power System, vol. 13, no. 4, pp 1521-1527

Hadi Saadat. (2002), Power System Analysis, 2nd edition, McGraw-Hill, Inc., Singapore.

Huang, Garng M., and Ali Abur. (2002), Voltage Security Margin Assessment, PSERC Publication 02-49

K. Bavithra, S. C. Raja, and P. Venkatesh, 2016. "Optimal Setting of FACTS Devices using Particle Swarm Optimization for ATC Enhancement in Deregulated Power System," IFAC-PapersOnLine, vol. 49, no. 1, pp. 450-455.

M.A. Pai (1984), Computer Techniques In Power System Analysis, Tata McGraw-Hill Publishing Co. Ltd, New Delhi.

M. H. Gravener and C. Nwankpa. (1999). Available transfer capability and first order sensitivity, IEEE Transactions on Power System, vol. 14, no. 2, pp 512-518.

NERC Transmission Transfer Capability Task Force. (1995). Transmission Transfer Capability, North American Electric Realibility Council.

NERC Transmission Transfer Capability Task Force. (1996). Available Transfer Capability, Definition and Determination, North American Electric Realibility Council.

P. W. Sauer. (1997). “Technical challenges of computing Available Transfer Capability in electric power systems”, Proceedings of the 30th Annual Hawaii International Conference On System Sciences, Vol. V, Hawaii, pp. 589-593.

PowerWorld Corporation. (2004), PowerWorld Simulator User’s Guide. http://www.powerworld.com

Santiago Grijalva, et al. (2003). “Enhancement of linear ATC calculations by the incorporation of reactive power flows”, IEEE Transactions on Power System, vol. 18, no. 2, pp 619-624.

Santiago Grijalva and Peter W. Sauer. (1999), “Reactive power considerations in linear ATC computation”, Proceedings of the 32nd Hawaii International Conference On System Sciences.

T. Nireekshana, G. K. Rao, and S. S. Raju. (2016). "Available transfer capability enhancement with FACTS using Cat Swarm Optimization," Ain Shams Engineering Journal, vol. 7, no. 1, pp. 159-167.

Y. R. H. Esmaili, A. M. A. Hemmatyar. (2012). "ATC Enhancement Using SSSC, a Case Study of Harmony Search Vs PSO," Journal of Basic and Applied Scientific Research, vol. 2, no. 4, p. 10, TextRoad Publication


Article Metrics

Abstract view : 230 times | PDF view : 32 times

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.