Jarak Berhenti Becak Motor Dengan Menggunakan Rem Depan

Zulhaji Zulhaji(1*), Darmawang Darmawang(2), Moh. Ahsan S. Mandra(3), Aswan Isma(4),

(1) Universitas Negeri Makassar
(2) Universitas Negeri Makassar
(3) Universitas Negeri Makassar
(4) Universitas Negeri Makassar
(*) Corresponding Author



Abstract


Abstract. This study aims to determine the distance of a motorized becak stop when braking. The motorized pedicab is a motorized pedicab that uses a braking system on both front wheels. Testing is done by testing the braking system on the two front wheels by providing maximum force on the brake lever at speeds of 20 km / h, 30 km / h and 40 km / h. The results showed that the braking distance produced at a speed of 20 km / h was 3.66 meters, the braking distance at a speed of 30 km / h was 5.31 meters and the braking distance at a speed of 40 km / h was 8.16 meters thereby increasing heavy vehicle load, the vehicle mileage will increase caused by moving humidity. So it can be concluded that with the maximum force pressure applied to the brake lever, the shorter the time required and the resulting braking distance is also shorter. The higher the speed of the motorized pedicab, the greater / further the braking distance produced

 

Keywords: Front Brake, Stop Distance, Motorcycle Pedicab

 


Full Text:

PDF

References


Hafidz, D. (2016). GAYA TEKAN PAD REM TERHADAP DISK ROTOR PADA KENDARAAN MINI BUGGY. Jurnal Konversi Energi Dan Manufaktur UNJ, 3(1), 29–34.

Herdianto, A. (2013). Perancangan Sistem Kemudi, Sistem Rem, Dan Roda Urban City Car Untuk Kompetisi Urbanconcept Shell Eco-Marathon. Mechanova, 2.

Indonesia, P. R. (2012). Peraturan Pemerintah Republik Indonesia Nomor 55 Tahun 2012 Tentang Kendaraan. Indonesia: Kementrian Perhubungan Republik Indonesia.

INDONESIA, P. R., & Indonesia, P. R. (1993). Peraturan Pemerintah No. 44 Tahun 1993 Tentang: Kendaraan Dan Pengemudi. Sekretariat Negara. Jakarta.

Nyoman, B. S. I. (2010). Sampurno, Teknologi Otomotif Edisi Kedua. Guna Widya.

Prayoga, B. D., Purnomo, H., & Bisono, F. (2018). Perancangan Dan Analisis Sistem Pengereman Hydraulic Pada Mobil Minimalis Roda Tiga. In Proceedings Conference on Design Manufacture Engineering and its Application (Vol. 1, pp. 94–104).

Pujiono, A. (2018). PEMBUATAN STAND REM CAKRAM PADA MINI TRUCK DENGAN MESIN PENGGERAK DIESEL 5 PK. Surya Teknika: Jurnal Ilmiah Teknik Mesin, 2(1).

Rachman, S. (2019). PENGATURAN PENGOPERASIAN ANGKUTAN BECAK MOTOR SUATU KAJIAN DARI UNDANG-UNDANG NOMOR 22 TAHUN 2009 TENTANG LALU LINTAS DAN ANGKUTAN JALAN (Suatu Studi di Kota Tidore Kepulauan). Jurnal Akrab Juara, 4(4), 56–70.

Ramadani, R., Poernomo, H., & Setiawan, T. A. (2017). Perancangan Sistem Pengereman Pada Kendaraan Bermotor Roda Tiga Sebagai Alat Bantu Transportasi Bagi Penyandang Disabilitas. In Proceedings Conference on Design Manufacture Engineering and its Application (Vol. 1, pp. 148–154).

Setiyono, R. (2015). Analisis Gaya Pengereman Pada Mobil Nasional Mini Truck. Universitas Muhammadiyah Surakarta.

Zahron, A. N., Karuniawan, B. W., & Setiawan, T. A. (2018). Analisa Pengujian Sistem Pengereman dan Pengujian Performa pada Kendaraan Bermotor Roda Tiga Sebagai Alat Bantu Transportasi Bagi Penyandang Disabilitas. In Proceedings Conference on Design Manufacture Engineering and its Application (Vol. 1, pp. 233–238).

Zulhajji, Z., Yahya, M., & Saharuna, S. (2016). Perancangan Sistem Pengereman Bentor Model Cakram (Design of Bentor Braking System with Disk Model). Scientific Pinisi, 2(2), 73–150


Article Metrics

Abstract view : 220 times | PDF view : 92 times

Refbacks

  • There are currently no refbacks.