Deteksi Kekasaran Permukaan Nugget Weld Dengan Menggunakan Aplikasi Terhadap Hasil Pengelasan Rsw pada Plat Stainless Steel 304

Muhammad Aqdar Fitrah(1*), Hermin Hardyanti Utami(2),

(1) Akademi Komunitas Industri Manufaktur Bantaeng
(2) Akademi Komunitas Industri Manufaktur Bantaeng
(*) Corresponding Author




DOI: https://doi.org/10.26858/ijfs.v9i1.37227

Abstract


Resistance Spot Welding (RSW) is welding process that is widely used in the automotive industry such as the manufacture of vehicle bodies. This study aims to measure the level of roughness in stainless steel grade 304 with the RSW Welding method. In this study, Gwyddion software was used to measure the roughness of stainless steel grade 304. This study used variations in electric current, which are 5kA and 7kA, with a pressure of 3 bar and 9 seconds with 100 x 25 mm for the size. Furthermore, for each electric current there are 3 specimens and macro photo tests are carried out then the roughness values for 5kA is 153 µm, 151 µm, and 150 µm. Moreover, the rough values of 7kA is 133 µm, 135 µm and 101 µm. From the results, it was found that the higher of welding current, the smoother of the roughness of the nugget weld. This is because the heat that enters the nugget weld undergoes a good maturation process.

Keywords


Nugget Welding, Roughness Value, RSW Welding, Stainless Steel 304

Full Text:

PDF

References


Azzouzi, D., Benkhedda, Y., & Boumeddane, B. (2019). Parametric study of the nugget growth in spot welding of 304L stainless steel sheets having equal and unequal thicknesses. SN Applied Sciences, 1(6), 1–12. https://doi.org/10.1007/s42452-019-0655-5

Atlas Steels Australia. (2019). Mechanical properties of 304 grade stainless steel Grade. 1–3.

Azzouzi, D., Benkhedda, Y., & Boumeddane, B. (2019). Parametric study of the nugget growth in spot welding of 304L stainless steel sheets having equal and unequal thicknesses. SN Applied Sciences, 1(6), 1–12. https://doi.org/10.1007/s42452-019-0655-5

Farrahi, G. H., Ahmadi, A., & Reza Kasyzadeh, K. (2020). Simulation of vehicle body spot weld failures due to fatigue by considering road roughness and vehicle velocity. Simulation Modelling Practice and Theory, 105(August), 102168. https://doi.org/10.1016/j.simpat.2020.102168

Kementrian Perindustrian. (2021). Menperin: Industri Otomotif Jadi Sektor Andalan Ekonomi Nasional. Kemenperin.Go.Id, 19–21. https://www.kemenperin.go.id/artikel/22297/Menperin:-Industri-Otomotif-Jadi-Sektor-Andalan-Ekonomi-Nasional

Miller. (2010). HANDBOOK FOR Resistance Spot Welding.

Moura, E. De, Silva, R. Da, Carvalho, A. De, & ... (2003). Welding defecets pattern recognition in TOFD signals using linear classifier implemented by neural networks. In Proc. 3th PanAmerican …. Citeseer. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.110.7657&rep=rep1&type=pdf

QIAO, W., & CHEN, X. (2012). Study of Welding Heat Influence on Concrete. World Bridges. http://en.cnki.com.cn/Article_en/CJFDTotal-GWQL201202018.htm

Silva, A. L., & Fox, G. (n.d.). Gwyddion user guide.

Suwarto, Suparno, & Ashwin, A. (2019). Pengaruh Variasi Kuat Arus dan Waktu Pengelasan Pada Proses Spotwelding Terhadap Kekuatan Tarik Dari Plat Mild Steel Tebal 1 Milimeter. 276–284.

Varkey, M. J., Sumesh, A., & Kumar, K. R. (2020). A Computational approach in optimizing process parameters influencing the heat input and Depth of Penetration of Tungsten Inert Gas welding of Austenitic Stainless …. Materials Today: Proceedings. https://www.sciencedirect.com/science/article/pii/S221478532033056X


Article Metrics

Abstract view : 97 times | PDF view : 61 times

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.