PRODUKSI DAN KARAKTERISASI KOMPOSIT RINGAN GEOPOPLIMER-SERAT GELAS

Amran Amran(1*), Subaer Subaer(2), Husain Husain(3),

(1) Universitas Negeri Makassar
(2) Universitas Negeri Makassar
(3) Universitas Negeri Makassar
(*) Corresponding Author




DOI: https://doi.org/10.35580/jspf.v18i1.32429

Abstract


Telah dilakukan penelitian yang bertujuan untuk memproduksi komposit ringan geopolimer-serat gelas berbahan dasar Fly-ash. Komposit disintesis dengan metode aktivasi alkali, kemudian ditambahkan agen berpori Hidrogen Peroksida (H2O2). Serat gelas ditambahkan pada geopolimer dan disusun berlapis membentuk komposit dan di curing pada suhu 70°C selama 3 jam, kemudian disimpan selama 28 hari sebelum dilakukan pengujian. Karakterisasi sampel dilakukan dengan pengujian SEM, massa jenis, porositas, daya serap air, konduktivitas termal, dan kuat tekan. Hasil karakterisasi SEM menunjukkan bahwa material geopolimer dengan serat gelas tidak berikatan dengan baik karena terdapat retakan disekitar serat gelas. Hasil pengujian massa jenis dan porositas sampel berturut-turut 1,35 gr/cm3; 1,31 gr/cm3; 1,27 gr/cm3; dan 1,25 gr/cm3 dan 10,7%, 12,7%, 13,19%, dan 13,71%. Hasil tersebut menunjukkan bahwa massa jenis menurun seiring dengan penambahan konsentrasi serat gelas sedangkan porositasnya meningkat. Daya serap air sampel meningkat seiring dengan penambahan konsentrasi serat gelas, diperoleh daya serap air tertinggi sebesar 11,7 % pada sampel komposit 1,5% serat gelas. Hasil pengujian konduktivitas termal menunjukkan bahwa terjadi penurunan nilai konduktivitas termal sampel seiring dengan penambahan serat gelas. Kuat tekan tertinggi pada komposisi sampel tanpa serat yaitu sebesar 6,4 MPa. Penurunan kuat tekan sampel diakibatkan oleh geopolimer dengan serat gelas tidak berikatan dengan baik, terlihat pada hasil karakterisasi SEM.

Full Text:

PDF

References


Dembovska, L., Bajare, D., Ducman, V., Korat, L., & Bumanis, G. (2017). The use of different by-products in the production of lightweight alkali activated building materials. Construction and Building Materials, 135, 315–322.

https://doi.org/10.1016/j.conbuildmat.2017.01.005

Hassan, H. S., Abdel-Gawwad, H. A., García, S. R. V., & Israde-Alcántara, I. (2018). Fabrication and characterization of thermally-insulating coconut ash-based geopolymer foam. Waste Management, 80, 235–240. https://doi.org/10.1016/j.wasman.2018.09.022

Malkawi, A. B., Al-Mattarneh, H., Achara, B. E., Mohammed, B. S., & Nuruddin, M. F. (2018). Dielectric properties for characterization of fly ash-based geopolymer binders. Construction and Building Materials, 189, 19–32. https://doi.org/10.1016/j.conbuildmat.2018.08.180

Nazim, A. R. M., Ansari, M. N. M., & Atiqah, A. (2020). Impact strength and morphological properties of Kenaf/glass fibre/polyester hybrid composite for attenuator application. Materials Today: Proceedings, 29, 119–122. https://doi.org/10.1016/j.matpr.2020.05.683

Petlitckaia, S., & Poulesquen, A. (2019). Design of lightweight metakaolin based geopolymer foamed with hydrogen peroxide. Ceramics International, 45(1), 1322–1330. https://doi.org/10.1016/j.ceramint.2018.10.021

Rashidian-Dezfouli, H., & Rangaraju, P. R. (2017). A comparative study on the durability of geopolymers produced with ground glass fiber, fly ash, and glass-powder in sodium sulfate solution. Construction and Building Materials, 153, 996–1009. https://doi.org/10.1016/j.conbuildmat.2017.07.139

Ray, K., Patra, H., Swain, A. K., Parida, B., Mahapatra, S., Sahu, A., & Rana, S. (2020). Glass/jute/sisal fiber reinforced hybrid polypropylene polymer composites: Fabrication and analysis of mechanical and water absorption properties. Materials Today: Proceedings, 33, 5273–5278. https://doi.org/10.1016/j.matpr.2020.02.964

Senff, L., Novais, R. M., Carvalheiras, J., & Labrincha, J. A. (2020). Eco-friendly approach to enhance the mechanical performance of geopolymer foams: Using glass fibre waste coming from wind blade production. Construction and Building Materials, 239, 117805. https://doi.org/10.1016/j.conbuildmat.2019.117805

Syamsidar, D., Nurfadilla, & Subaer. (2017). The Properties of Nano TiO 2 -Geopolymer Composite as a Material for Functional Surface Application. MATEC Web of Conferences, 97, 01013. https://doi.org/10.1051/matecconf/20179701013

Wang, W.-C., Wang, H.-Y., Chang, K.-H., & Wang, S.-Y. (2020). Effect of high temperature on the strength and thermal conductivity of glass fiber concrete. Construction and Building Materials, 245, 118387. https://doi.org/10.1016/j.conbuildmat.2020.118387


Article Metrics

Abstract view : 165 times | PDF view : 43 times

License URL: https://creativecommons.org/licenses/by-nc-nd/4.0/

Organized by :

Physics Department
Faculty of Mathematics and Natural Sciences,Universitas Negeri Makassar,
Daeng Tata Raya Street, Parangtambung, Tamalate, South Sulawesi, Indonesia.
Postal Code: 90224 Phone/Fax (0411)840622
Website: http://ojs.unm.ac.id, email: jspf@unm.ac.id

Jurnal Sains dan Pendidikan Fisika (JSPF) is licensed under a creative commons Attribution-NonCommercial-NoDerivatives 4.0 International License