Design Arduino-Based Complete Sensor Trainer as A Learning Medium

Purnamawati Purnamawati(1*), Muhammad Akil(2), Nuridayanti Nuridayanti(3),

(1) Universitas Negeri Makassar
(2) Universitas Negeri Makassar
(3) Universitas Negeri Makassar
(*) Corresponding Author




DOI: https://doi.org/10.26858/ijes.v25i1.33567

Abstract


Abstract. The use of learning devices in public lectures is an absolute requirement to provide convenience and smooth learning in the teaching process. The purpose of this research is to create a complete sensor trainer based on Arduino. The sensor grouping used in this trainer consists of light sensors, temperature sensors, tilt sensors, colour sensors, sound sensors, GSM & GPS, and Accelerometers. The overall research procedure is to start from the manufacture of box trainer design, PCB layout design, box trainer creation, PCB layout creation, module trials, repair, and module installation. Based on the research procedure, the creation of this trainer consists of two parts namely hardware and software. Trainer trials are conducted by examining the voltage source on the power supply and connecting it to each sensor module according to the required amount of voltage. The sensor module is in good condition and works when the indicator light on the module is lighted. Next, create a basic Arduino IDE-based sensor value reading program to ensure that the sensor module can function as in its usability. The development of this trainer can be done by connecting sensor and controller devices with the internet so that the monitoring and controlling process can be done based on IoT


Keywords


Design, Arduino-Based Complete

Full Text:

PDF

References


Agustio, W. (2019). “Upaya Meningkatkan Hasil Belajar Peserta Didik Melalui Penggunaan Media Trainer Monitor Televisi Pada Mata Pelajaran Perekayasaan Sistem Radio Dan Televisi Tentang Troubleshooting Monitor Televisi Kelas Xi Ea Smk Negeri 2 Kota Bogor,” J. Teknol. Pendidik., vol. 8, no. 1, p. 126, doi: 10.32832/tek.pend.v8i1.1735.

Chandra, A. (2018). “Pengembangan Trainer KIT Sensor Berbasis ATMEGA32 Sebagai Media Pembelajaran pada Mata Kuliah Sensor dan Tranduser,” JUPITER (JURNAL Pendidik. Tek. ELEKTRO), vol. 03, no. September, pp. 13–18.

Cikarge, G. P. and P. Utami. (2018). “Analisis dan Desain Media Pembelajaran Praktik Teknik Digital Sesuai RPS,” Elinvo (Electronics, Informatics, Vocat. Educ., doi: 10.21831/elinvo.v3i1.20509.

Fivia, Eliza and Dwoprima Elvanny Myori. (2017). “Trainer pada Pembelajaran Dasar dan Pengukuran Listrik,” J. Teknol. Inf. Pendidik. VOL. 10 NO. 1 April 2017 ISSN 2086 – 4981.

Habibie, N. H. (2018). “Media Pembelajaran Trainer Sensor Dan Transduser Pada Mata Pelajaran Dasar Kompetensi Kejuruan Kompetensi Keahlian Teknik Audio Video Di Smk Negeri 1 Pundong,” vol. 7, no. 2, pp. 1–6, 2018.

Hanifah, S. B. and E. Yundra. (2019). “Pengembangan Trainer Penghitung Digital Dua Digit Pada Mata Pelajaran Penerapan Rangkaian Elektronika Di SMK Negeri Sidoarjo,” J. Pendidik. Tek. Elektro.

Ibrahim, M., M. Nur, and K. A. (2010). Dasar-dasar proses belajar mengajar. Surabaya: Unesa University Press.

Jefiza, A., F. Okmayura, and R. W. Novchi. (2019). “Penggunaan Media Pembelajaran ‘Trainer Arduino’ Untuk Meningkatkan Kemampuan Guru Smk Di Pekanbaru,” War. LPM, vol. 22, no. 2, pp. 86–97, doi: 10.23917/warta.v22i2.8778.

Marwanto, D. and A. P. Budiono. (2016). “Rancang Bangun Trainer Berbasis Arduino untuk Menunjang Mata Kuliah Instrumentasi Kendali di Universitas Negeri Surabaya,” JPTM.

Nur, F. A. and B. Suprianto. (2017). “Pengembangan Trainer Kit Sensor Berbasis Arduino sebagai Media Pembelajaran pada Mata Pelajaran Teknik Pemrograman di SMKN 1 Jetis,” Pendidik. Tek. Elektro.

Setiawan, A. L. and N. Yuniarti. (2017).“Pengembangan media pembelajaran trainer kit sistem pengendali elektromagnetik,” Prodi Pendidik. Tek. Elektro.

Suryania, F., M. Sukardjo, and M. Yusro. (2019). “Perancangan Trainer Mikrokontroller Sebagai Media Pembelajaran untuk Meningkatkan Nilai Perekayasaan Sistem Kontrol pada SMK,” JINoP (Jurnal Inov. Pembelajaran), doi: 10.22219/jinop.v5i2.7701.

Susilo and Suyitno. (2017). “Pengembangan Media Pembelajaran Trainer Kelistrikan untuk Meningkatkan Hasil Belajar Siswa SMK Muhammadiyah Kutowinangun,” J. Pendidik. Tek. Otomotif_Universitas Muhammadiyah Purworejo, vol. 10, no. 01, pp. 77–82, 2017.


Article Metrics

Abstract view : 108 times | PDF view : 27 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Purnamawati Purnamawati, Muhammad Akil, Nuridayanti Nuridayanti

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.